Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

08.06.2025 00:26

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

a photo is worth a thousand words.

First Sentence:

[old diagram got deleted by accident]

How did you get to be a leftist?

the problem then depends on "how fast does the fuse operate?".

For this case there are devices called Metal oxide varistors (MOV).

The other is “what does a “fuse” do?”

Users Are Leaving Google Drive for This 2TB Cloud Plan - PCMag

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

This is where the MOV conducts again, and dissipated the energy.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Scientists Uncover a Lost World Hidden Beneath Antarctica’s Frozen Tapestry for Millions of Years - Indian Defence Review

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Billy Joel cracking jokes about ‘getting old,’ ‘cremated’ after brain disorder diagnosis, Tribeca doc director shares - New York Post

Here is a simplified AC power diagram.

nine

These devices are installed between the “hot” and “neutral” and protective ground.

What was your best unexpected reunion with your childhood best friend?

But… the neutral is now “floating” because of the 1 ohm resistance.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Barnstars:

Heroes of the Storm Live Patch Notes - June 2, 2025 - Blizzard News

Edit 2024–10.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

UPDATE: Additional measles exposure locations in Marquette, Delta counties - Upper Michigan's Source

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This one hit behind the barn.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What are some tips for a girl with low self-esteem to start dating?

This is where this question deviates from being a 'generic' question, and becomes more specific.

There are three different concepts here that are getting confused.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Heart Disease: What You Eat Matters More Than Cutting Carbs, Fat - Healthline

Can the fuse protect the electronic devices from lightning instead of a surge protector.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

(Dc diagram shown, AC is similar).

How do you fight the push and pull (manipulation) tactic if you want to win him?

eight

what exactly is a ‘surge’ protector?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

An AC voltage/ current source, and an ac inductive load.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

At one ohm, the resistor has a maximum of 1 watt power.

These are simplified answers to the original question, and does not change anything I wrote above.

2024–10–14 [Omar Gharbi Omar Gharbi ]

There are two important concepts here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

but I think this circuit , shows a few more pieces.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

He then asserts :

What is lightning?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

It also is a device that limits the change in current flow.

But it can get overloaded, and no longer works.

What does a fuse do?

A fuse is a non-resetable over current circuit protector.

In schematic diagrams this is the symbol for a fuse:

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

It seems Mohan does not understand the difference between a comment and an Answer.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

but this device (an Inductor) … impedes the rapid changes in the current.

The third is lightning and “how it gets conducted into a home.”

One

At least they know the answer if they wanted it.

2024–10–16 [ OO OLAOYE OYEBODE ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Upvotes:

[image of Common-mode choke]

This is the picture of an electronic coil of wire wound around a core of magnetic material.

2024–10–10[John johnson John Johnson ]

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is 'the assistant's answer'

Now when you have a certain ac resistance, then a current flows in a loop.

One is “what exactly is in a ‘surge protector’ ? ”

Because the load is inductive, the current lags the voltage.(by a bit).

He then describes the function of a fuse.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

The bolt then partially travels down the line to your home.

He then describes Rainy Season and Lightning.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This device then solves the entire problem.

so, what happens?

I post the exact comment here.

A circuit breaker is similar, but is resettable.